2008 Chevrolet Avalanche
Mileage
230,500
Service Date
12/12/2023
Services Performed
- CHECK FRONT END
- SHOCK &/OR STRUT ASSEMBLY – Remove & Install or Remove & Replace – Both – [DOES NOT include disassemble or alignment (where applicable).]
- SPARK PLUGS – Remove & Replace
- Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection.
- BALL JOINT – Remove & Replace – 4WD Lower,Both – [DOES NOT include alignment.]
- BALL JOINT – Remove & Replace – 4WD Upper,Both – [Serviced with Control Arm.] – [DOES NOT include alignment.]
- TIE ROD &/OR END – Remove & Replace – Outer,Both – [Includes: Adjust toe-in only. NOTE: Deduct .4 if alignment is also performed. NOTE: Manufacturer recommends removal of Rack and Pinion Steering Gear when replacing Inner Tie Rod End(s) on some models. If
- MOUNT/BALANCE 4 TIRES
- REPLACE FRONT BRAKE PADS AND ROTORS. CLEAN/LUBRICATE SLIDE PINS AND CHANNELS.
- ALIGN VEHICLE
RAY D. gave our service a 5 star review on 12/13/2023
